Last updated:
Union County, NC
Fence Repair in Marvin, NC
Long fence lines on big lots, a gate at the end of the drive, HOA review on most streets. We are a few minutes away in Waxhaw. Send photos and rough sizes, and we send a written quote.
Fence repair in Marvin, NC: leaning posts, broken pickets and boards, sagging gates and storm damage, $225 to $600 per repair visit, installed, plus tax, confirmed after the final measure. New fences: wood $35 to $42 per linear foot, vinyl $69 to $76 per linear foot, aluminum $66 to $80 per linear foot, installed, plus tax. You send photos and rough sizes, and we send a free written quote. Most jobs are quoted from your photos, with no visit. Marvin is in Union County (zip 28173). Call or text (704) 750-9173.
Most fence repairs $225-$600 per repair visit installed, plus tax, confirmed after the final measure
What Marvin does to a fence
Marvin is a village of large lots. An estate lot can carry several hundred feet of fence, and a lot of it is aluminum picket along the front and sides, with wood privacy around the pool or the back patio. A long run means a lot of posts, and on a long run a single bad post is easy to miss until the section next to it starts to lean.
The soil is the same red clay as the rest of Union County. Clay holds water, and a wood post that stands in wet clay goes soft at the ground line. Aluminum posts do not rot, but they are set in the same concrete, and when a footing cracks or heaves the section racks and the gate stops lining up with its latch.
The houses around Marvin Ridge and the newer streets off Marvin Road went up in waves. Fences built in the same wave age in the same wave, so when a neighbor is replacing posts, yours are usually close behind. That is the moment to count the posts and decide between a repair and a rebuild.
Minutes from our base
Marvin shares our 28173 zip code. A post that needs its concrete to cure overnight is an easy next-day return for us.
Repairs that pass the HOA
On a street with design review, a repair has to match: same height, same picket profile, same color on aluminum. We repair to match, and you get the finished result to send back.
What we do in Marvin
Fence repair
Leaning posts, rotted boards and loose rails on wood, vinyl and aluminum fences.
Gate repair
Walk gates and wide double gates that drag or will not latch.
Storm damage repair
Limbs cleared, broken posts and panels replaced along long runs.
New wood fence
Privacy around the patio or pool, quoted from your photos and the layout.
New vinyl fence
Privacy with no paint or stain, in the colors most HOAs allow.
New aluminum fence
The open picket look that fits an estate lot and most design rules.
Permits, setbacks and HOA approval in Marvin
Marvin is a village in Union County. Union County handles building permits and inspections. The Village of Marvin handles zoning and setbacks, and on a large lot the setback from the road and the side lines matters for where a new fence may go. A repair that keeps the same fence in the same place usually needs nothing.
Most streets in Marvin have an HOA with design review. Check with your HOA before a new fence and before a repair that changes how the fence looks from the street. The form usually wants a plan with the fence line, height, style and gate. We help with that drawing from your sizes. Read our Union County HOA guide.
Before we dig for a new fence we call 811, so the gas, water, irrigation and cable lines are marked for free. The village and the county have the final word on permits and setbacks, and the HOA on its own rules.
Prices and how it works
- Fence, gate and storm repairs: $225 to $600 per repair visit
- New wood, vinyl and aluminum fences: see the cost page for the per-foot ranges
Every price is installed, plus tax, confirmed after the final measure. See what moves the price on our fence cost page.
On a long run, walk it first and count the posts that lean. Then text us two or three photos and the rough sizes, or upload them here, and we send a free written quote. The work day is usually 6 to 10 days after you accept the quote, and it goes in writing. After you say yes, we confirm the exact sizes on site as part of the job. No free visit to quote.
North Carolina projects of $40,000 or more are contracted through our licensed general contractor partner.
Frequently Asked Questions
My fence in Marvin is very long. Do you charge by the foot for a repair?
Can you fix an aluminum fence, or only wood?
Who approves a new fence in Marvin?
Is a fence around a pool handled the same way?
Our Fence Services
Fence repair, gate repair and storm damage repair, plus new wood, vinyl and aluminum fences, across south Charlotte, Union County and York and Lancaster County, SC.
Cities We Serve
Cities with their own page. We also serve the towns around them, and larger fence projects up to about an hour from Waxhaw, NC. If you do not see yours, call us.
- Marvin, NC You are here
- Waxhaw, NC ~5 min
- Weddington, NC ~7 min
- Ballantyne, NC ~10 min
- Fort Mill, SC ~10 min
- Indian Land, SC ~12 min
- Tega Cay, SC ~15 min
- Lake Wylie, SC ~20 min
- SouthPark, NC ~20 min
- Myers Park, NC ~23 min
- Huntersville, NC ~50 min
- Cornelius, NC ~55 min
- Davidson, NC ~60 min
- Mooresville, NC ~65 min
- Denver, NC ~65 min
Ready to fix the fence?
Text us two or three photos and the rough sizes, and we send you a free written quote. No visit needed to quote. We answer during business hours, usually the same day.
Free written quote • Fully insured • English and Spanish
Not sure what to measure? See our 1-page measuring guide.